Making the Gramophone
Files For the Case of the Gramophone
- Ready-to-be-printed STL files: https://github.com/amstramgrame/amstramgrame/blob/master/gramophone/case/stls.zip
- OpenScad source files: https://github.com/amstramgrame/amstramgrame/tree/master/gramophone/case/src (
gramophone.scad
is the main point of entry)
Gramophone Components List
- x1 Gramophone case
- x1 LILYGO TTGO TAudio board
- x1 AIYIMA 4 Ohms 3W speaker
- x1 LI-ION 3.7V 2050mAh battery
- x1 small battery connector
- x1 3 positions switch
- x2 10k rotary linear potentiometer with knob
- x1 photoresistor
- x1 22x7mm washer
- x1 mountable press button
- x1 18x6mm washer
- x6 7x4mm washers
- x1 rotary encoder with button
- x6 10k resistors
- x4 YLX TF 2.5x10 PZ1 AB SPAX screws
- x10 YLX TF 2x10 PZ1 AB SPAX screws
- x1 250x25x1.4mm strap
- x1 25mm strap buckle
Gramophone Supplies List
- Electrical tape
- White, red, and black 22 AWG stranded wire
- Heat shrinks set
- Solder
- 10 wires ribbon cable
- x1 IDC 20 female plug
List of Tools to Build the Gramophone
- x1 small plier
- x1 small wire cutter
- x1 medium size plier
- x1 8mm wrench
- x1 10mm wrench
- x1 small Phillips screwdriver
- x1 pair of tweezers
- x1 stripper
- x1 dentist tool
- x1 heat gun
- x1 multimeter
- x1 soldering iron